When you are planning on getting some fencing done on your yard, you will find that it is very important for you to know how deep to make the holes for the post. This is when you should know more about how deep you have to make the post hole and know more about the material you are setting the post hole in to make sure it is going to take the first time that you dig the hole rather than the second time that you are out digging it out in an emergency because your animals knocked over your fencing.
Now, one aspect that you need to consider is the frost line that you are going to have in your area. This is typically about three feet down and this is how deep you will want to get the post holes dug. This way you are able to get the holes dug deep enough to avoid the frost from moving the posts back up to the surface when the ground freezes. What else you need to realize is the depth is going to be deeper depending on where you live or how often you get frost.
The second thing that you should look for is going to be the type of item you are going to use to secure the post in the ground. If you are going to use regular dirt you need to make sure you have it below the frost line or it could be pushed up out of the ground. If you are going to use concrete to set the post in you will be able to have them right around the frost line or a little bit higher. However, you will find that this is going to be something you need to be aware of as it will need time to set and you need to be careful about the frost pushing up the post.
Being able to set a post in the ground is a good thing, but it can be a challenge in getting it to the right depth. This is when you should know more about how deep you should be setting your fence post to guarantee they are going to be dug to the right depth. Without this you could end up getting to reset all of your fence posts again because you did not have the depth dug down properly. For more questions call your San Diego fencing pros, Penns Fence Company San Diego at (619) 375-3022.